NanoFX 2.0 question
 

Ok, I've got this working very well. The only thing wrong is it replaced the LoadTacticalSounds.py and now I don't have sound on my Valkyrie fighter, but that's minor. I want to know if there's a way to warp to more systems other than Belaruz, Starbase 12, and Vesuvi.

Re: NanoFX 2.0 question
 

If you have quick battle replacement mod, you can setup as many systems as you want to warp to. From the stock quick battle, you only have those two systems. If you had quick battle replacement on before, you're going to have to re-install it, cause for some odd reason, NanFX 2.0 erases it when you installed it. Also, when you re-install the quick battle replacement mod, it will erase your ability to configure Nano FX 2.0 the way you want it. You'll still have the Nano FX 2.0 fx, but you just can't tinker with it. The only way to solve that is to re-install Nano FX 2.0, but you then you get the problem with quick battle replacement mod again. Basically, you're going to have to go back and forth with installing each mod if you want to use both to their fullest. Keep in mind, this is a beta release, so I'm sure these problems are being solved as we speak.

Re: NanoFX 2.0 question
 

Ick, no other way?

Re: NanoFX 2.0 question
 

u can also use one of the multisystem mods by Cjones that will allow you to warp to multiple systems

Re: NanoFX 2.0 question
 

OK, I'll try something. What do I do for my Valkyrie? For it to have pulse phaser, photonic missle, and micro photon sounds, the read-me says to insert <insert sound text> into the LoadTacticalSounds.py. Unfortunately, if I do that, then my Quickbattle won't work with NanoFX 2.0. I get the loading screen for a split second, then get black.

Re: NanoFX 2.0 question
 

what file is it on Bcfiles? that would be easier to figure out what the problem is.

Re: NanoFX 2.0 question
 

Never mind, I got it fixed. It was because I put the stuff in on notepad and notepad screwed up the whole script.
Plus, it's not on BCfiles.